Protecting Files - JVC GR-DV500 Instructions Manual

Protecting Files

The Protect mode helps prevent the accidental
erasure of files.
Power Switch
Lock Button
Rewind Button (3)
VIDEO/MEMORY Switch
Fast-Forward Button (5)
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to "MEMORY".
3
Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
The type of file (IMAGE, E-MAIL CLIP or TITLE)
which has been played back at the last time is
displayed.
If you want to select another type of file, go to
step 5.
If not, go to step 7.
5
Press SELECT. The MEMORY SELECT screen
appears.
6
Rotate the MENU Wheel to select the desired
type of file, and press it.
7
Press the MENU Wheel in. The Menu Screen
appears.
8
Rotate the MENU Wheel
to select "PROTECT", and
press it. The Sub Menu
appears.
SELECT Button
pg. 16)
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
BR I HT G
END
To protect the currently displayed file
9
Rotate the MENU Wheel
to select "CURRENT", and
press it. The PROTECT
screen appears.
10
Press 3 or 5 to
select the desired file.
11
Rotate the MENU
Wheel to select
"EXECUTE", and press it.
To cancel protection,
select "RETURN".
Repeat steps 10 and 11
for all files you want to
protect.
To protect all files stored in the memory
card
9
Rotate the MENU Wheel to select "PROT.ALL",
and press it. The PROTECT screen appears.
10
Rotate the MENU Wheel to select "EXECUTE",
and press it.
To cancel protection, select "RETURN".
NOTES:
If the " " mark appears, the currently displayed
file is protected.
When the memory card is initialized or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
To Remove Protection
Before doing the following, perform steps 1 – 8 in
"Protecting Files" in the left column.
To remove protection from the currently
displayed file
9
Rotate the MENU Wheel to select "CURRENT",
and press it. The PROTECT screen appears.
10
Press 3 or 5 to select the desired file.
11
Rotate the MENU Wheel to select "EXECUTE",
and press it.
To cancel selection, select "RETURN".
Repeat steps 10 and 11 for all files you want to
remove protection.
CONTINUED ON NEXT PAGE
27
EN
M E NU
PROTECT CUR RENT
PROT . AL L
CANC . AL L
RETURN
P ROTECT
PROTECTED
RETURN