Using The Camcorder As A Webcam - JVC GR-DV500 Instructions Manual

Using The Camcorder As A
WebCam
This camcorder can be used as a WebCam via USB
connection.
USB cable
(provided)
To USB connector
USB-equipped PC
To USB
1
Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
2
Connect the camcorder to your PC using the USB
cable.
3
Set the VIDEO/MEMORY Switch to "MEMORY".
4
Set the Power Switch to "A" or "M" while
pressing down the Lock Button located on the
switch.
5
Turn on the PC.
" " appears on the screen.
If the PC is not powered on, the camcorder
does not enter the Web Camera mode.
6
When finished, turn off the PC first, then the
camcorder. Disconnect the USB cable from the
camcorder and PC.
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
( pg. 11)
Use the provided software PIXELA ImageMixer to
capture video in real time.
You can also use the camcorder for web
conference by using Microsoft Windows
®
NetMeeting and signing up for MSN Hotmail.
In the Web Camera mode, the following buttons
cannot be operated: TITLE, E-MAIL, SNAPSHOT,
INDEX, NAVI, NAVI STORE, the Recording Start/
Stop Button.
Refer to the instruction manuals of the PC and
provided Software.
67
EN
®