Video Playback; Normal Playback; Still Playback - JVC GR-DV500 Instructions Manual

20
EN

Normal Playback

MENU Wheel (VOLUME)
Power Switch
Lock Button
VIDEO/MEMORY Switch
Stop Button (8)
Rewind Button (3)
Speaker
1
Load a cassette. (
2
Set the VIDEO/MEMORY Switch to "VIDEO".
3
Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
4
To start playback, press 4/9.
5
To stop playback, press 8.
During Stop mode, press 3 to rewind, or
5 to fast-forward the tape.
NOTES:
Clean the video heads using an optional dry
cleaning cassette when:
• No picture during playback.
• Blocks of noise appear during playback.
For details, pg. 75.
If Stop mode continues for 5 minutes when power
is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power
Switch to "OFF", then to "PLAY".
Play/Pause Button (4/9)
Fast-Forward Button (5)
pg. 15)
The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
( pg. 22)
You can also view the playback picture on the
LCD monitor with it flipped over and pushed
against the camcorder body.
LCD monitor/viewfinder indications:
• When power is supplied from a battery: the
" " battery indicator is displayed. (
• When power is supplied from an AC outlet: the
" " battery indicator does not appear.
When a cable is connected to the AV connector,
the sound is not heard from the speaker.
To control the speaker volume...
Rotate the MENU Wheel towards "+" to turn up the
volume, or towards "–" to turn down the volume.

Still Playback

Pauses during video playback.
1) Press 4/9 during playback.
2) To resume normal playback, press 4/9 again.
If still playback continues for more than about
3 minutes, the camcorder's Stop mode is
automatically engaged.
When 4/9 is pressed, the image may not
pause immediately while the camcorder
stabilizes the still image.

VIDEO PLAYBACK

pg. 84)