Program Ae With Special Effects - JVC GR-DV500 Instructions Manual

WIPE – CORNER: Wipe in on a black screen
from the upper right to the lower left corner, or wipe
out from lower left to upper right, leaving a black
screen.
WIPE – WINDOW: The scene starts in the
center of a black screen and wipes in toward the
corners, or comes in from the corners, gradually
wiping out to the center.
WIPE – SLIDE: Wipe in from right to left, or
wipe out from left to right.
WIPE – DOOR: Wipe in as the two halves of a
black screen open to the left and right, revealing the
scene, or wipe out and the black screen reappears
from left and right to cover the scene.
WIPE – SCROLL: The scene wipes in from the
bottom to the top of a black screen, or wipes out
from top to bottom, leaving a black screen.
WIPE – SHUTTER: Wipe in from the center of
a black screen toward the top and bottom, or wipe
out from the top and bottom toward the center
leaving a black screen.

Program AE With Special Effects

IMPORTANT:
Some modes of Program AE with special effects
cannot be used with certain Wipe/Fader effects.
( pg. 32) If an unusable mode is selected, the
indicator of Wipe/Fader effects blinks or goes out.
1
Set the Power Switch to "M" while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Set "r" to the desired mode. (
4
Press PROG.AE to activate the selected effect.
The selected effect indicator appears.
To deactivate the selected effect...
Press PROG.AE again. The effect indicator
disappears.
NOTES:
Program AE with special effects can be changed
during recording or during Record-Standby.
Some modes of Program AE with special effects
cannot be used during Night-Alive.
60th of a second. Black bands that usually appear
when shooting a TV screen become narrower.
1/100th of a second. The flickering that occurs when
shooting under a fluorescent light or mercury-vapor
lamp is reduced.
(Variable Shutter Speed: 1/250 – 1/4000)
This setting allows fast-moving images to be
captured one frame at a time, for vivid, stable slow-
motion playback. The faster the shutter speed, the
darker the picture becomes. Use the shutter function
under good lighting conditions.
otherwise appear too dark when shooting in
extremely bright surroundings such as in the snow.
may otherwise appear too bright when shooting
under extremely strong direct lighting such as
spotlights.
NOTE:
"SPOTLIGHT" has the same effect as –3 with the
exposure control. (
natural. White Balance (
automatically set to "
your desired setting. When Twilight is chosen, the
camcorder automatically adjusts the focus from
approx. 10 m (32 ft) to infinity. From less than 10 m
(32 ft), adjust the focus manually. The flash does not
fire in this mode.
pg. 31)
PROGRAM AE
(Factory-preset: SHUTTER 1/60)
SHUTTER 1/60: The shutter speed is fixed at 1/
SHUTTER 1/100: The shutter speed is fixed at
SPORTS
SNOW: Compensates for subjects that may
SPOTLIGHT: Compensates for subjects that
pg. 46)
TWILIGHT: Makes evening scenes look more
pg. 34, 47) is
", but can be changed to
CONTINUED ON NEXT PAGE
33
EN