Table of Contents
Advertisement
EN27
I Protecting Files
The Protect mode helps prevent the accidental
erasure of files.
Power Switch
Rewind Button (_141)
/
VIDEO/MEMORY Switch I
SELECT Button
Fast-Forward Button
(llq_)
I
Load a memory card. (:-a_ pg. 16)
2 Set the VIDEO/MEMORY
Switch to "MEMORY".
3 Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
• The type of file (iMAGE, E-MAIL CLiP or TITLE)
which has been played back at the last time is
displayed.
If you want to select another type of file, go to
step 5.
If not, go to step 7.
5 Press SELECT. The MEMORY SELECT screen
appears.
6
Rotate the MENU Wheel to select the desired
type of file, and press it.
7 Press the MENU Wheel in. The Menu Screen
appears.
8 Rotate the MENU Wheel
to select "PROTECT", and
press it. The Sub Menu
appears.
To protect
the currently
displayed
file
9
Rotate the MENU Wheel
to select "CURRENT", and
press it. The PROTECT
screen appears.
10
Press _
or _
to
select the desired file.
1 1
Rotate the MENU
Wheel to select
"EXECUTE", and press it.
• To cancel protection,
select "RETURN".
• Repeat steps 10 and 11
for all files you want to
protect.
To protect all files stored in the memory
card
ozs
9
Rotate the MENU Wheel to select "PROT.ALL',
._
and press it. The PROTECT screen appears.
_:
10
Rotate the MENU Wheel to select "EXECUTE",
and press it.
• To cancel protection, select "RETURN".
NOTES:
• If the "C_" mark appears, the currently displayed
file is protected.
• When the memory card is initialized or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
ToRemoveProtection
Before doing the following,
perform steps 1 -- 8 in
"Protecting Files" in the left colum11.
,_
TO remove
protection
from
the currently
displayed
file
9
Rotate the MENU Wheel to select "CURRENT",
and press it. The PROTECT screen appears.
_
10
Press _
or _
to select the desired file.
1 1 Rotate the MENU Wheel to select"EXECUTE",
and press it.
_u.t
To cancel selec ran, select
RETURN .
..a
• Repeat steps 10 and 11 for all files you want to
_l_
remove protection.
CONTINUED
ON NEXT PAGE
Advertisement
Table of Contents
