Initializing A Memory Card - JVC GR-DV500 Instructions Manual

30
EN
To Print By Selecting Still Images And Number
Of Prints
1
Perform steps 1 – 8 in "To Print All Still Images
(One Print For Each)" (
2
Rotate the MENU Wheel
to select "CURRENT", and
press it. The DPOF screen
appears.
3
Press 3 or 5 to
select the desired file.
4
Rotate the MENU Wheel to select the number
indication (00), and press it.
5
Select the number of prints
by rotating the MENU
Wheel towards "+" to
increase number, or
towards "–" to decrease
the number, and press it.
Repeat steps 3 through 5
for the desired number of prints.
The number of prints can be set up to 15.
To correct the number of prints, select the
image again and change the number.
6
Rotate the MENU Wheel
to select "RETURN", and
press it. The "SAVE?"
appears.
If you did not change
any settings in step 3
through 5, the Menu
Screen reappears.
7
Rotate the MENU Wheel to select "EXECUTE" to
save the setting you have just made, and press it.
To cancel selection, select "CANCEL".
To Reset The Number Of Prints
1
Perform steps 1 – 8 in "To Print All Still Images
(One Print For Each)" (
2
Rotate the MENU Wheel to select "RESET", and
press it. The DPOF screen appears.
3
Rotate the MENU Wheel to select "EXECUTE",
and press it. The normal playback screen
appears.
To cancel selection, select "RETURN".
The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
pg. 29).
DPOF
SHEETS
0 0
RETURN
DPOF
SHEETS
0 5
DPOF
SAVE?
EXECUTE
CANCEL
pg. 29).
D.S.C. PLAYBACK (cont.)

Initializing A Memory Card

You can initialize a memory card anytime.
After initializing, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1
Set the VIDEO/MEMORY Switch to "MEMORY".
2
Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Press the MENU Wheel in.
The Menu Screen appears.
5
Rotate the MENU Wheel
to select "FORMAT", and
press it. The FORMAT
screen appears.
6
Rotate the MENU Wheel
to select "EXECUTE", and
press it. The memory card
is initialized.
When initialization is finished, "NO IMAGES
STORED", "NO E-MAIL CLIP STORED" or
"NO TITLE DATA STORED" appears.
To cancel initialization, select "RETURN".
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialization.
Also, be sure to use the provided AC Adapter, as
the memory card may be corrupted if the battery
becomes exhausted during initialization. If the
memory card becomes corrupted initialize it.
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
BR I GHT
END
F ORMAT
ERASE AL L
EX I ST I NG DATA?
EXECUTE
RETURN