Make Connections - JVC GR-DV500 Instructions Manual

62
EN

Make Connections

Also refer to page 22.
Connector
Cover**
To AV
Audio/Video
cable
(provided)
White to
AUDIO L IN
Yellow to
VIDEO IN
Red to
AUDIO R
IN
VCR
TV
DISPLAY
(provided with GR-
* Connect when your TV/VCR has an S-VIDEO IN
connector. In this case, it is not necessary to
connect the yellow video cable.
** When connecting the cable, open the cover.
Connector
Cover**
To S
To EDIT
Editing cable
(provided with GR-
DV900 only)
S-Video cable
(optional)
To S-VIDEO IN*
ABTo Remote
PAUSE or
R.A.EDIT
CTo PAUSE IN
RM-V717U
RM-V700U
(optional)
DV900 only)
USING THE REMOTE CONTROL UNIT (cont.)
1
A A JVC VCR equipped with a Remote PAUSE
connector...
...Connect the editing cable to the Remote
PAUSE connector.
B A JVC VCR not equipped with a Remote
PAUSE connector but equipped with an
R.A.EDIT connector...
...Connect the editing cable to the R.A.EDIT
connector.
C A VCR other than above...
...Connect the editing cable to the remote
control's PAUSE IN connector.
2
Insert a recorded tape into the camcorder.
3
Set the VIDEO/MEMORY Switch to "VIDEO".
4
Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
5
Turn the VCR power on, insert a recordable tape
and engage the AUX mode.
Refer to the VCR's instructions.
NOTES:
The S-Video cable is optional. The Editing cable is
optional for GR-DV800/500. Be sure to use the
following cables:
• YTU94146B S-Video cable.
• PEAC0369-150 Editing cable.
Consult the JVC Service Center described on the
sheet included in the package for details on its
availability. Make sure to connect the end with a
core filter to the camcorder. The core filter
reduces interference.
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If
they do, they will be recorded onto the new tape.
To choose whether or not the following displays
appear on the connected TV...
• Date/time
Set "DATE/TIME" to "AUTO", "ON" or "OFF".
( pg. 31, 41) Or, press DISPLAY on the remote
control (provided with GR-DV900 only) to turn
on/off the date indication.
• Time code
Set "TIME CODE" to "OFF" or "ON".
( pg. 31, 41)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". ( pg. 31, 41)
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be
connected instead of an S-Video cable and audio/
video cable.