Automatic Demonstration - JVC GR-DV500 Instructions Manual

Automatic Demonstration

Automatic Demonstration takes place when "DEMO
MODE" is set to "ON" (factory-preset).
MENU Wheel
Lock Button
Power Switch
DE O
Sub Menu
SY ST M E
M MO DE – OFF
O N
Automatic Demonstration starts when there is no
operation for about 3 minutes after the Power
Switch is set to "A" or "M" and no cassette is in
the camcorder.
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minute after that, the demonstration will
resume.
"DEMO MODE" remains "ON" even if the
camcorder power is turned off.
To cancel Automatic Demonstration
1
Set the Power Switch to "M" while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Press the MENU Wheel in. The Menu Screen
appears.
4
Rotate the MENU Wheel to select "s", and
press it. The SYSTEM Menu appears.
5
Rotate the MENU Wheel to select "DEMO
MODE", and press it. The Sub Menu appears.
6
Rotate the MENU Wheel to select "OFF", and
press it.
7
Rotate the MENU Wheel to select "BRETURN",
and press it twice. The normal screen appears.
NOTE:
Detach the lens cap to see the actual changes of the
Automatic Demonstration activated on the LCD
monitor or viewfinder.
9
EN