JVC GR-DV500 Instructions Manual page 70

70
EN
7. The LCD monitor or
viewfinder indications blink.
8. Digital Zoom does not work.
Video and D.S.C. Playback
SYMPTOM
9. Play, Rewind and Fast-Forward
functions do not work.
10. The tape is moving, but there is
no picture.
11. Blocks of noise appear during
playback, or there is no
playback picture and the
screen becomes blue.
12. A memory card cannot be
played back.
7. • Certain Wipe/Fader effects,
certain modes of Program AE
with special effects, "DIS"
and other functions that
cannot be used together are
selected at the same time.
8. • 10X optical zoom is selected.
• The VIDEO/MEMORY
Switch is set to "MEMORY".
POSSIBLE CAUSES
9. • The Power Switch is set to
"A" or "M".
• VIDEO/MEMORY Switch is
set to "MEMORY".
10. • Your TV has AV input
terminals, but is not set to its
VIDEO mode.
• The cassette holder cover is
open.
11.
—
12. • The Power Switch is set to
"A" or "M".
• The VIDEO/MEMORY
Switch is set to "VIDEO".
TROUBLESHOOTING (cont.)
7. • Re-read the sections covering
Wipe/Fader effects, Program
AE with special effects and
"DIS". ( pg. 31 – 34, 36)
8. • Set "ZOOM" to "40X" or
"300X". ( pg. 35)
• Set the VIDEO/MEMORY
Switch to "VIDEO".
CORRECTIVE ACTION
9. • Set the Power Switch to
"PLAY". ( pg. 20)
• Set the VIDEO/MEMORY
Switch to "VIDEO".
10. • Set the TV to the mode or
channel appropriate for
video playback. (
• Close the cassette holder
cover. ( pg. 15)
11. • Clean the video heads with
an optional cleaning
cassette. (
12. • Set the Power Switch to
"PLAY". ( pg. 24)
• Set the VIDEO/MEMORY
Switch to "MEMORY".
pg. 22)
pg. 77)