Recording Menus; Wipe Or Fader Effects - JVC GR-DV500 Instructions Manual

32
MENUS FOR DETAILED ADJUSTMENT (cont.)
EN
4) Press the MENU Wheel in.
The Menu Screen returns.
Repeat the procedure if
you wish to set other
function menus.
5) Press the MENU Wheel in
again. The Menu Screen
closes.
NOTES:
The "m" settings are effective when the Power
Switch is set to both "A" and "M". However, the
menu settings can be changed only when the
Power Switch is set to "M".
The "q" settings are effective only when the
Power Switch is set to "M".
The "s" functions which are set when the Power
Switch is set to "M" are also applied when the
Power Switch is set to "PLAY".
The "n" (CAMERA DISPLAY) settings are
effective even when the Power Switch is set to
"A". However, the menu settings can be changed
only when the Power Switch is set to "M".
The "n" (CAMERA DISPLAY) settings are
effective only for shooting except "BRIGHT".
The "n" (VIDEO DISPLAY) settings are effective
only for video playback except "BRIGHT".
The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote
control (provided). (
W I PE / F D A E R
FA DE – R W H I
FA DE – R B LA
FA DE – R B .W
W I PE C – O RN
W I PE W – I ND
W I PE S – L I D
W I PE D – O OR
W I PE S – C RO
W I PE S – H UT
pg. 22, 52, 62)

Wipe Or Fader Effects

T E
C K
E R
O W
IMPORTANT:
E
L L Some Wipe/Fader Effects cannot be used with
T E R
certain modes of Program AE with special effects.
( pg. 33) If an unusable Wipe/Fader Effect is
selected, its indicator blinks in blue or goes out.
These effects let you make pro-style scene
transitions. Use them to spice up the transition from
one scene to the next.
Wipe or Fader works when video recording is started
or stopped.
1
Set the VIDEO/MEMORY Switch to "VIDEO".
2
Set the Power Switch to "M" while pressing down
the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Set "v" to the desired mode. (
5
To activate the Fade-in or Wipe-in, press FADE/
WIPE during Record-Standby mode.
The selected effect indicator appears.
To activate the Fade-out or Wipe-out, press
FADE/WIPE during recording.
The selected effect indicator appears.
6
Press the Recording Start/Stop Button to activate
the Fade-in/out or Wipe-in/out.
To deactivate the selected effect...
Press FADE/WIPE again in step 6. The effect
indicator disappears.
NOTE:
You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
WIPE/FADER
FADER–WHITE: Fade in or out with a white
screen.
FADER–BLACK: Fade in or out with a black
screen.
FADER–B.W: Fade in to a color screen from a
black and white screen, or fade out from color to
black and white.

RECORDING MENUS

pg. 31)
(Factory-preset: FADER–WHITE)