How To Attach The Core Filter - JVC GR-DV500 Instructions Manual

6
EN

How To Attach The Core Filter

(GR-DV800/500 only)
(for optional editing cable)
Attach the core filter to an optional editing cable.
The core filter reduces interference.
1
Release the stoppers on both ends of the core
filter.
Stopper
2
Run the cable through the core filter, leaving
approx. 3 cm (1-3/16") of cable between the
cable plug and the core filter. Wind the cable
twice around the outside of the core filter as
shown in the illustration.
Wind the cable so that it is not slack.
3 cm (1-3/16")
3
Close the core filter until it clicks shut.
NOTES:
Take care not to damage the cable.
When connecting a cable, attach the end with the
core filter to the camcorder.
How To Use The Audio Cable
When using optional headphones or external
microphone, connect to the provided Audio cable
(with a core filter attached), then connect the Audio
cable to the camcorder. The core filter reduces
interference.
Audio cable
(provided)
Wind twice.
Headphones
Core filter
Microphone
Open the
connector cover.
To MIC
To
(headphones)