Honda CRF450X 2005 Service Manual page 255

CLUTCH / STARTER CLUTCH/KICKSTARTER/GEARSHIFT LINKAGE
Do nor forgel
to
Install the washer and gearshift spindle into the
Instllil the washer
crankcase while aligning the spring ends with the
OntO the gearshift
crankcase stopper pin and the gearshift spindle with
spindle.
the shifter coltar.
Apply oil to the gearshift spindle serration area .
Install the gearshift pedal on its original position as
marked during removal.
Tighten the bolt to the specified torque.
TORQUE: 12 N·m 0 .2 kgf·m . 9Ibf-ft)
Move the gearshift pedal and check the shift mecha-
nism for smooth operation.
Install the following :
- Clutch (page 11 ·12)
- Right crankcase cover (page 11-6)
11-27