Honda CRF450X 2005 Service Manual page 130

FUEL SYSTEM
Remove the screw and throttle stop screw stay.
Remove the screws, hose guides, and float cham-
ber.
Remove the O-ring from the float chamber.
The push rod link
Pull out the push rod while holding the push rod l ink
lever adjusting
lever.
screw is fac/ory
pre-set. Adjustment
and disassembly
are nor necessary.
6-16
Check the diaphragm for deterioration or pin hole.
Check the spring for damage or fatigue.
Check the push rod for wear, bends or damage .
Remove the float pin, float and float valve.
Check the float for damage or fuel in the float.
Replace the float
jf
necessary.
FLOAT CH,AMISER STAY
O-RING
SPRING
PUSH ADD
•