Honda CRF450X 2005 Service Manual page 139

(
'-
(
Connect the throttle position sensor 3P (Black) con·
nector.
Install the shock absorber upper mounting bolt and
nut.
Tighten the upper mounting nut to the specified
torque.
TORQUE: 44 N'm 14.5 kgf·m , 32 Ibf.ft)
Lower the sub-fram e and connect the air cleaner
!1'.;,:~
connecting boot securely. ~,
Tighten the sub-frame mounting bolts to the speci·
fied torq ue.
TORQUE ('05 - '07):
Upper: 30 N'm (3.1 kgf·m, 22 Ibf.ft)
lower: 49 N'm (5.0 kgf·m, 36 Ibf.ft)
TORQUE (After '07):
Upper/lower: 49 N'm (5.0 kgf·m, 36 IbUt)
Tighten the air cleaner connecting boot band screw
P--"
secu rely.
Install the following:
- Muffler ('OS - '07: page 3·9, After '07: page 3-11)
- Fuel tank (page 3-8)
- Seat (page 3-3)
After installation, ch eck the followi ng:
- Secondary air leak around the in sulator and co n-
necti ng boot
- Fuel leaks around the fu el hose and carburetor
- Route the overflow hose, air vent hoses and fuel
hose properly ('05 - '07: page '-25, After '07:
page 1·32).
- Throttle ope ration (page 4-9)
- Hot start lever (page 4-10)
FUEL SYSTEM
6-25