Caller List; Call Block - Panasonic KX-TGA710B Operating Instructions Manual

Basic Operation

Caller list

Viewing the caller list
1
MCALLER LISTN
2
Press MCN to search from the
most recent call, or MDN to
search from the oldest call.
3
To exit, press MEXITN 2 times.
Erasing selected caller
information
1
MCALLER LISTN
2
MbN: Select the desired entry.
3
MERASEN
4
MbN: "Yes" a MOKN
R To exit, press MEXITN 2

Call block

The unit can block calls:
– when receiving the call from the
phone number in
pre-programmed call block list
(14000 items).
– by storing the desired items in
the user's call block list
beforehand (up to 2000 items).
12
PNQX8877ZA_0115_ver101.pdf 12
times.
For assistance, please visit http://shop.panasonic.com/support
Note:
R The numbers stored in the
pre-programmed call block list
cannot be displayed.
R Depending on your external
phone, your phone may ring
once while caller information is
being received even if you
registered the phone number in
the call block list.
To disconnect the current call
and add a phone number to the
call block list
You can press the MBLOCK
CALLN button in the following
situations to disconnect the
current call and add a phone
number to the call block list:
– when an incoming call is being
received
– when talking on an outside call
using external phone
Once a phone number has been
added to the call block list, the unit
will block calls from that phone
number in the future.
1
Press MBLOCK CALLN under
the situations shown above.
R The call block number is
stored in the call block list,
"CALL BLOCKED" is
displayed and announced,
and then the call is
*1
disconnected.
2019/01/15 17:09:23