Using The 6-In-1'S Timer; Plug 'N Power Functions - Radio Shack 6-in-1 Remote Control Owner's Manual

15-1923.fm Page 12 Monday, July 19, 1999 12:41 PM
In this case, you must press the desired
device key before you use the 6-in-1's
or
NEL + (On) CHANNEL – (Off)
• If you selected
AUX1
punch-through ,
TV
not programmed
AUX1
VCR, or CBL device.

USING THE 6-IN-1'S TIMER

This feature lets you set your 6-in-1 to turn off
your TV after 60 minutes.
1. Press on the 6-in-1.
TIMER
2. Within 15 seconds, press
The red light blinks once.
Note: If you do not press
onds, the red light does not blink. Start again
from Step 1.
3. Leave the 6-in-1 pointing at the TV's infrared
sensor. Make sure there is nothing blocking
the line of sight between the 6-in-1 and the
TV.
To cancel the timer, hold down
light blinks once, or press
.
(All Lts On)
PLUG ' N POWER FUNCTIONS
The Plug 'n Power feature allows you to control
lights and appliances with an optional IR com-
mand console (RadioShack
10037703) or Plug 'n Power Wireless Remote
Control System (Cat. No. 61-2676). You also
need Plug 'n Power light modules and appliance
modules (available through your local Ra-
dioShack store) to use this feature.
Need help? Call 1-800-989-4706
12
CHAN-
keys.
or , you can
AUX2
, or if you have
VCR CBL
or as a TV,
AUX2
on the 6-in-1.
ENT
within 15 sec-
ENT
until the red
TIMER
then press
TV POWER
Unlimited No.