Volume Unlock On An Auxiliary Device; Resetting Volume Lock To The Original Settings; Using The Sleep Timer; Setting The Sleep Timer - Radio Shack Light and Learn Remote Owner's Manual

2. Hold down until the red light blinks twice.
P
3. Press . The red light blinks twice.
9 9 3
4. Press . The red light blinks four times.
VOL–
To control the volume through your auxiliary device,
press before using the volume controls.
CD

Volume Unlock on an Auxiliary Device

1. Press .
AUX
2. Hold down until the red light blinks twice.
P
3. Press . The red light blinks twice.
9 9 3
4. Press . The red light blinks four times.
VOL–
To control the volume through your auxiliary device,
press before using the volume controls.
AUX
Resetting Volume Lock to the Original
Settings
1. Hold down until the red light blinks twice.
P
2. Press . The red light blinks twice.
9 9 3
3. Press . The red light blinks twice.
TV

USING THE SLEEP TIMER

On a TV or CBL/SAT device, the Sleep Timer lets you
program the chosen device to turn off automatically.
You can set the Sleep Timer in 15-minute increments,
for up to 60 minutes.

Setting the Sleep Timer

1. Select or
TV CBL/SAT
2. Press once to activate the Sleep Timer for
SLEEP
15 minutes. The red light blinks once, then contin-
ues to blink once about every 24 seconds, to indi-
cate the Sleep Timer is activated.
Operation
.
19