Using The Sleep Function - Radio Shack 7-in-One Home Theater Owner's Manual

15-1935.fm Page 38 Thursday, December 31, 1998 11:37 AM
After Setup
After you have set up your devices, you might need to
find out which code is operating one of them. For exam-
ple, to find out what three-digit code is operating your
TV:
1. Press .
TV
2. Hold down
SETUP
3. Press . CODE SETUP appears.
MENU
4. Press . DEV SET UP appears.
SELECT
5. Press twice. DEV NUMBER appears.
MENU
6. Press . TV and the code for that device
SELECT
appear.
Note: To view the three-digit code for another
device, press the key for the device you want to
view in Step 1.
7. Write down the three-digit code then press
stop programming.

USING THE SLEEP FUNCTION

To use the sleep timer built into your TV, cable convert-
er, satellite system, or audio device, press
( then ). Most sleep timers advance in incre-
SHIFT MUTE
ments of 10 or 15 minutes. For specific instructions on
setting your device's sleep timer, refer to the device's
owner's manual.
Or, if your device does not have a sleep timer, follow
these steps to enable Sleep Lock on the 7-in-One. Then
you can use the 7-in-One's built-in sleep timer with all
devices.
1. Hold down
SETUP
Need help? Call 1-800-763-9232
38
until TIMED SEQ appears.
until TIMED SEQ appears.
to
ESC
SLEEP