Using The Sleep Timer; Controlling Lights And Appliances - Radio Shack 15-1925 Owner's Manual

15-1925.fm Page 17 Monday, July 19, 1999 12:59 PM
Follow these steps to turn off punch-through.
1. Press the device key (
device you want to use to control the volume,
for example. Then press
light blinks twice.
2. Press – – . The red light blinks twice.
9 9 3
Press the device key (
device you want to use to control the volume.
The red light blinks twice to indicate punch-
through is turned off.
To turn on the punch-through feature, press
– – – – . The red light blinks twice to
UP 9 9 3 TV
indicate that punch-through is on.

USING THE SLEEP TIMER

If your original remote control had a sleep timer
function, your 6 in 1 IR/RF Remote Control's
key operates the same as on your original
SLEEP
remote.
Follow the instructions for the sleep timer function
in the owner's manual from your original remote
control. Press in the exact same manner
SLEEP
as the original remote control's SLEEP key was
pressed.
CONTROLLING LIGHTS AND
APPLIANCES
The Plug 'n Power feature allows you to control
lights and appliances, using the supplied RF com-
mand console along with an optional IR com-
mand console (RadioShack
10037703). You also need Plug 'n Power light
modules and appliance modules (available
through your local RadioShack store) to use this
feature.
Need help? Call 1-800-950-7044
or ) for the
CBL VCR
until the red
SET UP
or ) for the
CBL VCR
SET
Unlimited No.
17