Draytek Vigor 2130 Series User Manual page 274

Default SIP Account
In addition, you can press the Advanced button to configure volume gain, MISC and DTMF
mode. Advanced setting is provided for fitting the telecommunication custom for the local
area of the router installed. Wrong settings might cause inconvenience for users.
Caller ID Type
Volume Gain
MISC
DTMF
You can set SIP accounts (up to six groups) on SIP
Account page. Use the drop down list to choose one of the
profile names for the accounts as the default one for this
phone setting.
Play dial tone only when account registered - Check this
box to invoke the function.
Choose one of the selections as caller ID type.
Mic Gain (1-10)/Speaker Gain (1-10) - Adjust the volume
of microphone and speaker by entering number from 1- 10.
The larger of the number, the louder the volume is.
Dial Tone Power Level - This setting is used to adjust the
loudness of the dial tone. The smaller the number is, the
louder the dial tone is. It is recommended for you to use the
default setting.
Ring Frequency - This setting is used to drive the
frequency of the ring tone. It is recommended for you to
use the default setting.
DTMF Mode – There are four DTMF modes for you to
choose.
InBand - Choose this one then the Vigor will send the
DTMF tone as audio directly when you press the keypad on
the phone
264
Vigor2130 Series User's Guide