Draytek Vigor 2130 Series User Manual page 200

Source Port Filter
Source Port No.
Source Port Range
Dest. Port Filter
Dest. Port No.
Dest. Port Range
TCP FIN
Specify the TCP port source filter for this ACE.
Any: No TCP source filter is specified.
Specific: If you want to filter a specific TCP source filter
with this ACE, you can enter a specific TCP source value.
A field for entering a TCP source value appears.
Range: If you want to filter a specific TCP source range
filter with this ACE, you can enter a specific TCP source
range value. A field for entering a TCP source port range
appears.
Type the value if you choose Specific as the Source Port
Filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this TCP source value.
Type the value if you choose Range as the Source Port
Filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this TCP source value.
Specify the TCP port destination filter for this ACE.
Any: No TCP destination filter is specified.
Specific: If you want to filter a specific TCP destination
filter with this ACE, you can enter a specific TCP
destination value. A field for entering a TCP destination
value appears.
Range: If you want to filter a specific TCP destination
range filter with this ACE, you can enter a specific TCP
destination range value. A field for entering a TCP
destination port range appears.
Type the value if you choose Specific as the Dest. Port
filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this TCP source value.
Type the value if you choose Range as the Dest. Port filter.
The allowed range is 0 to 65535. A frame meeting this
ACE matches this TCP source value.
Specify the TCP "No more data from sender" (FIN) value
for this ACE.
0: TCP frames where the FIN field is set must not be able
to match this entry.
1: TCP frames where the FIN field is set must be able to
match this entry.
Any: Any value is allowed.
190
Vigor2130 Series User's Guide