General Setup - Draytek Vigor 2130 Series User Manual

Below shows the LAN menu:
3 . 2 . 1 G e n e r a l S e
3 . 2 . 1 G e n e r a l S e
This page provides you the general settings for LAN.
Click LAN to open the LAN settings page and choose General Setup.
IP Address
Subnet Mask
For IP Routing Usage
IP Address
Subnet Mask
PPPoE Passthrough
DNS Server Configuration
t u p
t u p
Type in private IP address for connecting to a local private
network (Default: 192.168.1.1).
Type in an address code that determines the size of the
network. (Default: 255.255.255.0/ 24)
Click Enable to invoke this function. The default setting is
Disable.
Type in secondary IP address for connecting to a subnet.
(Default: 192.168.2.1/ 24)
An address code that determines the size of the network.
(Default: 255.255.255.0/ 24)
The router offers PPPoE dial-up connection. Besides, you
also can establish the PPPoE connection directly from local
clients to your ISP via the Vigor router. When PPPoA
protocol is selected, the PPPoE package transmitted by PC
will be transformed into PPPoA package and sent to WAN
server. Thus, the PC can access Internet through such
direction.
Enable Server - DHCP stands for Dynamic Host
Configuration Protocol. The router by factory default acts a
48
Vigor2130 Series User's Guide