Stitch Selection - Bernina 56 User Manual

56-82e_EN_ES_FR_PT_230807:07_55-90e_EN_ES_FR_PT.qxd
56 66
23.8.2007
82e55 65 80e 90e
16:12 Seite 62
How to choose your
GB EN
pattern
For straight stitch select pattern " " with
pattern selector dial. Adjust the stitch
length with the stitch length dial. You may
choose any needle position from center to
left, by turning the stitch width dial.
For zigzag stitch, select pattern " " with
pattern selector dial. Adjust the stitch
length and stitch width according to the
fabric being used.
To obtain any of the other patterns shown
in the upper row on the stitch selection
panel, select the pattern with the pattern
selector dial. Adjust the stitch length and
the stitch width with the control dials
according to the result desired. (see Quick
reference draw)
To obtain any of the patterns on the
second row, turn the stitch length dial to
"S", select the pattern desired with pattern
selector dial, and adjust the stitch width
with the stitch width dial. To switch to
"Position S", turn the stitch length knob to
the 0, continue turning the knob in the
same direction.
Note:
Between the positions "0" and "S", a bit of
resistance is to be expected.