Bernina 56 User Manual page 104

56-82e_EN_ES_FR_PT_230807:07_55-90e_EN_ES_FR_PT.qxd
56 66
23.8.2007
82e
16:12 Seite 106
GB EN Twin needle
· Turn stitch length dial to the desired
stitch length.
· Pattern selector on " "
· Center needle position.
· Make sure that the two threads used to
thread the twin needle are of the same
weight. You can use one or two colors.
· Insert the twin needle in the same way as
single needle. Flat side of needle should
face away from you.
· Follow instructions for single needle
threading. Thread each needle separately.
Please note:
When sewing with twin needle, always
proceed slowly, and make sure to maintain
low speed to insure quality stitching.
When using twin needle on zig-zag make
sure the stitch width dial is set between
"0" and "2.5". Do not use twin needle at
setting above "2.5". (model 56)
When using twin needle on zig-zag make
sure the stitch width dial is set between
"0" and "4". Do not use twin needle at
setting above "4". (model 66/82e)