Restarting - Mercedes-Benz Sprinter Operator's Manual

lamp in the instrument cluster (
lights up.
The tire pressure is shown in 2 red rectangles.
The pressure of the tire concerned is shown
in one of the two rectangles (
Additionally, a warning tone sounds.
Each tire that is affected by a significant loss
of pressure is highlighted in the pressure dis-
play.
Restarting the tire pressure monitor
When you restart the tire pressure monitor,
the currently set tire pressure are taken as
reference values for monitoring.
In most cases, the tire pressure monitor
detects the new reference values automati-
cally, e.g. after you have:
changed the tire pressure
R
mounted
R
mounted new wheels or tires
R
However, you can also define reference val-
ues manually as described here.
Before restarting the tire pressure moni-
tor:
Set the tire pressure to the value recom-
X
mended on the Tire and Loading Informa-
tion placard or the tire pressure table on
the B-pillar on the driver's side
( page 290).
Y
Observe the notes on tire pressure when
doing so ( page 290).
Y
Make sure that the tire pressure is correct
X
on all four wheels.
page 229) Restarting the tire pressure monitor
Y
(vehicles without steering wheel but-
tons):
Turn the key to position 2 in the ignition
X
page 199).
lock.
Y
Press the 4 menu button on the instru-
X
ment cluster repeatedly until the display
shows the following message:
+CAL- TPMS +CAL- TPMS
Press the f button on the instrument clus-
X
ter.
The display shows:
OK TPMS OK TPMS
The tire pressure monitor activation proc-
ess has begun. The tire pressures meas-
ured for the individual wheels are stored as
the new reference values, provided that the
tire pressure monitor considers them to be
plausible.
If you wish to cancel the restart:
Press the g button or the 4 menu button
X
on the instrument cluster.
The activation process is canceled auto-
matically if 30 seconds elapse without
input.
Restarting the tire pressure monitor
(vehicles with steering wheel buttons):
Turn the key to position 2 in the ignition
X
lock.
Press the V or U button on the steer-
X
ing wheel repeatedly until the standard dis-
play is shown (
Press the & or * button on the steer-
X
ing wheel repeatedly until the current pres-
sure of the individual tires is displayed or
the display shows the following message:
Tire pres. Tire
for several minutes for several minutes
Press the 9 reset button on the instru-
X
ment cluster.
The display shows the following message:
Tire pressure
page 189).
Y
pres. displayed displayed after after driving
295
driving
Z