Operating With The Button (Control Panel) - Mercedes-Benz Sprinter Operator's Manual

Operating the auxiliary heating system
124
Operating with the button (control
panel)
i
Switch the heater booster function on or
off with the ¢ button (
To activate the auxiliary heating sys-
X
tem: press the upper section of the y
switch for longer than two seconds.
The red indicator lamp in the button lights
up. The auxiliary heating heats or ventilates
the interior to the temperature that you
have set. The blower switches to the first
level.
To switch off auxiliary heating: press the
X
upper section of the y button.
Or
Turn the key in the ignition lock to posi-
X
tion 0.
The red indicator lamp in the button goes
out. The auxiliary heating operates for
another two minutes and then switches off
automatically.
Selecting a switch-on time
Important information
You can use the on-board computer to define
up to three switch-on times, one of which can
be selected.
The yellow indicator lamp in the y button
goes out after 30 minutes, if you:
have selected the switch-on time and
R
turn the key to position 0 in the ignition
R
lock.
On-board computer without steering
wheel buttons
X
X
Or
X
X
page 130).
Y
X
On-board computer with steering wheel
buttons
X
X
i
Turn the key to position 2 in the ignition
lock.
Press the y button.
The y symbol flashes in the display.
Press the 4 menu button on the instru-
ment cluster repeatedly until the y
symbol flashes in the display.
Use the f or g buttons on the instrument
cluster to select the switch-on time
The switch-on time selected is displayed.
Wait 10 seconds for the standard display to
appear.
The switch-on time is selected. The yellow
indicator lamp in the y button lights up.
If you do not preselect a switch-on time,
and --:-- --:-- is shown in the display, this
means that the automatic switch-on mode
is switched off. The yellow indicator lamp
in the y button goes out.
Turn the key to position 2 in the ignition
lock.
Press the y button.
The Aux. heat Aux. heat submenu is shown in the
display.
If no switch-on time has been selected, the
selected switch-on time is highlighted or
Timer off Timer off is highlighted.
You can also access the
menu via the Settings( Settings
menu.
1 1 to 3 3 .
Aux. heat. Aux. heat. sub-
page 190)
Y