Table of Contents
Advertisement
3 – Features and controls
Front panel
1 POWER switch
Use this to turn the unit on
and off.
2 Drive 1 display
Shows track and playback
information, etc. for drive 1, as well as the menu
parameters and settings.
3 Disc tray (1)
Holds the disc for drive 1.
4 MENU key (1)
Press this in order to bring up
the menu selections for drive 1.
5 PITCH key and indicator
When lit, and the pitch menu is set to a value other
than 0.0%, playback will speed up and slow down
and the pitch will alter, according to the menu value
(pitch may be altered ±9.9%).
6 MEMO IN key and indicator
light. When lit, the A and B points may be set.
7 LOC A key and indicator
MEMO IN
key (above) is lit, pressing this key will put
the current playback position into the A memory
point. The indicator lights. When the
cator is not lit and the
LOC A
this key will move the playback position to the set
point.
8 LOC B key and indicator
key (above) is lit, pressing this key will put
MEMO IN
the current playback position into the B memory
point. The indicator lights. When the
cator is not lit and the
LOC B
this key will move the playback position to the set
point.
16
TASCAM CD-RW402 Owner's Manual
Press to light.
Press to
When the
indi-
MEMO IN
indicator is lit, pressing
When the
indi-
MEMO IN
indicator is lit, pressing
9 CALL key (1)
This key moves playback
position to the last playback start position. See "Cue
point" on page 22.
A DISPLAY key (1)
type of drive 1.
B DISC COPY key
of discs from 1 to 2.
C OPEN CLOSE (1)
of drive 1.
D PHONES selector switch
output from the
PHONES
drive
2
or
COMMON
(drive 1 if both are playing, or
the deck that is playing if only one is playing).
E PHONES LEVEL
jack with the
control.
LEVEL
F PHONES jack
Use ordinary stereo head-
phones with this 1/4" stereo jack.
G JOG key and indicator (1)
the indicator. When it is lit, this allows the playback
position of the disc in drive 1 to be adjusted (see
"Using the jog function" on page 23).
H MULTI DIAL (1)
Turn this to select menu
parameters, and values for menu parameters, and
press it to select the parameters and set the values.
It can also be used for selecting tracks for playback,
etc. as explained in the appropriate sections of this
manual.
I SEARCH keys (1)
and "fast rewind".
Changes the time display
Starts the copying process
Opens and closes the tray
This selects the
jack to be either drive
,
1
Adjust the level from the
Press to light
Allow "fast forward"
Advertisement
Table of Contents
