Table of Contents
Advertisement
4 – Playback operations—Simple playback operations
Track skip
Use the
(or the track skip keys on the
MULTI DIAL
remote control unit) to jump forward or backward by
one track at a time, as shown on the display.
Note that going forward from the last track of the
disc will "wrap round" to track 1, and going back-
ward from the first track of the disc will "wrap
round" to the last track of the disc.
The track number indicators at the bottom of the dis-
play shows the selected track (the lit indicator at the
left of the row of indicators).
It is also possible to use the number keys on the
remote control unit to jump directly to a particular
track:
Cue point
The cue point is the point at which playback last
started from ready mode. Every time the unit goes
from ready mode to play mode, the cue point is
updated.
To return to the cue point, from stop, ready or play
mode:
A and B points (drive 1 only)
The A and B location points provide two more con-
venient memory locations and they may also be used
when copying discs.
To set these points:
1
Press the
MEMO IN
is lit.
2
At the playback point to be assigned, press
either the
or the
LOC A
If a point has already been assigned to these
locations, the indicator will be lit. If no point
has been assigned to these locations, the indi-
cator lights when the point is assigned.
The
indicator goes out.
MEMO IN
3
Repeat the process for the other location
point, if desired.
22
TASCAM CD-RW402 Owner's Manual
key so that the indicator
key.
LOC B
1
Select drive 1 or 2 with the switch as appro-
priate.
To play tracks 1 through 9, simply press the
appropriate key (
1
2
To play a track whose number is higher than
9, press the
key an appropriate number
+10
of times to set the "tens" digit of the track
number, followed by a single key to set the
"units" digit. For example:
Track 13 =
,
+10
3
Track 30 =
,
+10
+10
NOTE
On the main unit only, the search keys can be used to
"fast-forward" and "fast-rewind" through the disc.
1
Simply press the
CALL
position is returned to the cue point and the
drive enters ready mode. Press
playback from this point.
NOTE
This call function is not available in the shuffle playback
mode.
Using the location points
To use these location points as points for playback,
simply press the appropriate
(when the indicator is lit). The playback position
moves to the location point and the drive enters ready
mode.
Erasing the location points
The location points are automatically erased (the
point is unassigned from the location point) when the
drive tray is opened, or they can be erased in stop
mode by pressing
MEMO IN
or
key (the indicator goes out).
LOC B
NOTE
The A and B points should not be too close together
(that is, less than four seconds) when being used for
copying as described in "Copying discs" on page 44.
through
).
9
,
,
+10
0
key. The playback
PLAY
to start
LOC A
or
LOC B
key
followed by the
LOC A
Advertisement
Table of Contents
