Table of Contents
Advertisement
Quick Links
CD Rewritable Recorder
Ü
ÿ
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Ÿ
The exclamation point within an equilateral triangle is intended to alert the user to the pres-
ence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
This appliance has a serial number
located on the rear panel. Please record
the model number and serial number
and retain them for your records.
Model number
Serial number
OWNER'S MANUAL
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
D00808300A
Advertisement
Table of Contents
Related Manuals for Tascam CD-RW750
Summary of Contents for Tascam CD-RW750
- Page 1 D00808300A CD Rewritable Recorder OWNER’S MANUAL Ü CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ÿ The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
-
Page 2: Important Safety Instructions
Do not place any objects filled with liquids, such the apparatus. as vases, on the apparatus. 11 Only use attachments/accessories specified by Do not install this apparatus in a confined space the manufacturer. such as a book case or similar unit. TASCAM CD-RW750 Owner’s Manual... -
Page 3: Important Safety Precautions
CAUTION The wires in this mains lead are coloured in accordance Changes or modifications to this equipment not with the following code: expressly approved by TEAC CORPORATION for BLUE : NEUTRAL compliance could void the user’s authority to operate BROWN : LIVE this equipment. -
Page 4: Safety Information
DO NOT USE THE PRODUCT IN ITS DAMAGED STATE. For U.S.A. Optical pickup: Type : SF-W03PDX Manufacturer : SANYO Electric Co. Ltd. Laser output : Less than 40 mW on the objective lens Wavelength : 783 ±3 nm TASCAM CD-RW750 Owner’s Manual... -
Page 5: Table Of Contents
Sync recording (stop) ........21 and CD-RW discs ..........9 Setting the trigger level........22 Default values ............ 10 Automatic track division........22 2 – Features of the CD-RW750 Digital direct ............23 Front panel ............11 Rec mute function ..........23 Rear panel ............ -
Page 6: Introduction
CD player. It will, naturally, be play- able on the CD-RW750. This is in no way a limita- tion of the CD-RW750 itself, but of the difference between the different types of media and the methods used to read them. -
Page 7: Finalizing
• The remote control unit • Two AAA batteries for the remote control unit • A rack-mounting screw kit (screws and washers) Contact your TASCAM supplier if any of these items are missing. TASCAM CD-RW750 Owner’s Manual... -
Page 8: Rack-Mounting The Unit
As the unit may become hot during operation, always mend that you save all the packing materials that came with the CD-RW750, in case you need to transport it in leave sufficient space above the unit for ventilation. the future. -
Page 9: Handling Of Compact Discs
• If you are in any doubt as to the care and handling from sources of heat such as radiators or heat-gen- of a CD-R disc, read the precautions supplied with erating electrical devices. the disc, or contact the disc manufacturer directly. TASCAM CD-RW750 Owner’s Manual... -
Page 10: Default Values
“Fade-in and fade-out” on page 23 3 seconds FADE IN time “Fade-in and fade-out” on page 23 3 seconds FADE OUT Volume (DIGITAL IN) “Input selection” on page 18 0 dB Play mode “Playback modes” on page 16 Continue TASCAM CD-RW750 Owner’s Manual... -
Page 11: Features Of The Cd-Rw750
2 – Features of the CD-RW750 4 5 6 9 A B Front panel 1 POWER switch 9 MENU key The power switch is used Repeated presses of this key cycle to switch the unit on and off. through the different menu items used to set parame- ters. -
Page 12: Rear Panel
2 – Features of the CD-RW750 H STOP key Use the lower (outer) control to adjust the left signal, Use this key to stop playback or and the upper (inner) control to adjust the right recording. signal. I PLAY key Use this key to start or resume Turning the controls clockwise past the “... -
Page 13: Rc-Rw750 Remote Control Unit
2 – Features of the CD-RW750 RC-RW750 Remote control unit through the outputs when not recording or in record ready mode. 9 DISPLAY key Use this key to switch between the different display modes available (equiv- alent to A PLAY MODE key... -
Page 14: Use Of The Remote Control Unit
Using the timer function You can set the CD-RW750 to start playback when it When the unit is turned on it will start playing from is switched on (for example, from an external timer). -
Page 15: Playback Operations
18). TEXT information, the first 12 characters of the track The CD-RW750 also shows (at the top left of the dis- title (track titles can be up to 23 characters in length) play) one of the following: are shown for about two seconds, about three sec- onds into the track. -
Page 16: Track Search
(and entered) key switches between showing the total DISPLAY using the CD-RW750. Only one title per disc or track running time of the disc and the disc title (if the final- may be displayed or entered (i.e. artist names cannot ized disc contains CD TEXT information). -
Page 17: Programmed Order Playback
The If you press the key, playback stops, and STOP indicator lights and the indicator REPEAT if you press the key, playback continues to flashes. the B (end) point of the loop and continues from there. TASCAM CD-RW750 Owner’s Manual... -
Page 18: Recording
Frequency conversion The sampling frequency for CDs is 44.1 kHz. The being played back at a non-standard speed using a CD-RW750 will always record (and play back) CDs varispeed unit (more than 1% away from the stan- at this frequency. -
Page 19: Basic Recording
MULTI JOG SKIP on an ordinary CD player, the CD-RW750 can play to select a track for playback. back tracks that have been recorded. Time display while recording While a recordable disc is being played back, the... -
Page 20: Manual Track Division
) key to select the Starting playback of the source automatically starts SYNC REC synchronization mode. The synchronization mode recording on the CD-RW750 if SYNC ALL determines the automated start and stopping of has been selected (see “Sync recording SYNC 1 recording when a signal is received. -
Page 21: Sync Recording (Start)
SYNC OFF Automatic synchronized record start and stop functions are disabled and must be per- When the input level goes below the trigger level for formed manually. more than six seconds (as in the SYNC ALL mode). TASCAM CD-RW750 Owner’s Manual... -
Page 22: Setting The Trigger Level
When recording in sync mode, you may notice a slight delay between starting the source, and the CD-RW750 level responding. This is due to the way in which the unit... -
Page 23: Digital Direct
1 second to 24 seconds. Fade-ins are from –" (silence) to the set input level (“Input selection” on page 18) and fade-outs go from the current input volume to silence. TASCAM CD-RW750 Owner’s Manual... - Page 24 FADER keys. PLAY PAUSE The fade-in and fade-out times can be reset to new values while recording is in progress. Fades are also possible in digital direct mode (“Digi- tal direct” on page 23). TASCAM CD-RW750 Owner’s Manual...
-
Page 25: After Recording
CD-R NO TOC key ( NOTE The display shows FINALIZE OK? Although CD-R discs finalized on the CD-RW750 may be To start the finalizing process, press the MULTI replayed on ordinary CD players, remember that final- control or press the ENTER ized CD-RW discs may not play on CD players. -
Page 26: Erasing Tracks
This is equivalent to formatting a disk on a operation, etc.), or has been used in a computer or computer to prepare it for use. This operation another piece of equipment that makes it unreadable, destroys all data on the disc. TASCAM CD-RW750 Owner’s Manual... -
Page 27: Titling (Cd Text)
Titling (CD TEXT) when the number of the track whose title will The CD-RW750 allows you to add titles to discs and/ or tracks on the disc which can be read and displayed be edited is displayed. -
Page 28: Reference And Specifications
Possible cause and remedy No sound on playback (the disc is playing and the The connections from the CD-RW750 to the amplifier system have not been made properly, or the time display is incrementing) input source selector is not at the correct position. -
Page 29: Audio Specifications
19 x 3.9 x 12.3 (in) Weight 6.7 kg (14.75 lb) Supplied accessories RC-RW750 remote control unit 2 x type 3 (AAA) batteries Rack mounting kit Dimensional drawing 483mm (19") 21mm (0.8") 285 mm (11.2") 6.5mm (0.25") 465mm (18.3") 435mm (17.1") TASCAM CD-RW750 Owner’s Manual... - Page 30 TEAC FRANCE S. A. Phone: +33-1-42-37-01-02 www.tascam.fr! 17 Rue Alexis-de-Tocqueville, CE 005 92182 Antony Cedex, France TEAC AUSTRALIA PTY.,LTD. A.B.N. 80 005 408 462 Phone: +61-3-9672-2400 Facsimile: +61-3-9672-2249 www.tascam.com.au! 280 William Street, Port Melbourne, Victoria 3000, Australia TEAC ITALIANA S.p.A.