Table of Contents
Advertisement
8 – Copying discs—A-B Excluded copy
The drive 2 display shows
allows a preview of the material immediately
before point A, immediately followed by the
material following point B (in other words, a
preview of the "join").
6
To rehearse the copy, turn the
(2) to select
, and press the
YES
The joined section is repeated. Display 2
shows
. If the join is satisfactory,
RehearsalOK?
press the
MULTI DIAL
and reset the A and B points.
If you do not want to rehearse, choose
and press the
MULTI DIAL
48
TASCAM CD-RW402 Owner's Manual
. This
ExclRHSL>
MULTI DIAL
.
MULTI DIAL
, otherwise press
STOP
,
NO
.
7
Select the copy speed (x4, x2 or x1), and press
the
(2).
MULTI DIAL
Drive 2 display shows
8
Press the
MULTI DIAL
place (standby and copy) as for other copy
operations.
The displays return to normal when the copy
operation is complete.
NOTE
The error messages mentioned above appear if the
wrong type of disc has been loaded as source or desti-
nation.
If the A and B points are too close together the display
shows
.
Not enough
.
COPY START ?
(2). Copying takes
Advertisement
Table of Contents
