Yamaha YZ250F(R) Owner's Service Manual page 55

Ò Make sure that the throttle
position sensor lead coupler
does not go out side the chas-
sis.
˜ Fasten the throttle position
sensor lead.
ˆ Fasten the neutral switch lead
on the oil hose with a plastic
locking tie and cut off the tie
end.
Ø Fasten the neutral switch lead.
∏ Fasten the neutral switch lead
and CDI magneto lead.
ΠPass the neutral switch lead,
CDI magneto lead and radiator
breather hose between the
radiator and frame.
CABLE ROUTING DIAGRAM
 Pass the carburetor breather
hoses and overflow hose so
that all there hoses do not con-
tact the rear shock absorber.
2 - 19
SPEC