CDI MAGNETO
EC4L5000
ASSEMBLY AND INSTALLATION
CDI magneto
1. Install:
Stator 1
●
Screw (stator) 2
●
NOTE:
Apply the sealant on the grommet of the CDI
●
magneto lead.
Tighten the screws using the T30 bit.
●
Quick gasket
ACC-QUICK-GS-KT
YAMAHA Bond No. 1215:
90890-85505
2. Install:
Woodruff key 1
●
Rotor 2
●
NOTE:
Clean the tapered portions of the crankshaft
●
and rotor.
When installing the woodruff key, make sure
●
that its flat surface a is in parallel with the
crankshaft center line b.
When installing the rotor, align the keyway c
●
of the rotor with the woodruff key.
3. Install:
Washer 1
●
Nut (rotor) 2
●
Use the rotor holding tool 3.
Rotor holding tool:
YU-1235/90890-01235
4 - 80
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
®
:
56 Nm (5.6 m · kg, 40 ft · lb)