SWINGARM
2. Install:
Bearing 1
●
Oil seal 2
●
To relay arm.
NOTE:
Apply the molybdenum disulfide grease on
●
the bearing when installing.
Install the bearing by pressing it on the side
●
having the manufacture's marks or numbers.
Installed depth of bearings a:
5 mm (0.20 in)
3. Install:
Bearing 1
●
Oil seal 2
●
To connecting rod.
NOTE:
Apply the molybdenum disulfide grease on
●
the bearing when installing.
Install the bearing by pressing it on the side
●
having the manufacture's marks or numbers.
Installed depth of bearings a:
5 mm (0.20 in)
Swingarm
1. Install:
Bushing 1
●
Thrust bearing 2
●
Oil seal 3
●
Collar 4
●
To swingarm 5.
NOTE:
Apply the molybdenum disulfide grease on the
bushings, thrust bearings and oil seal lips.
2. Install:
Collar 1
●
To relay arm 2.
NOTE:
Apply the molybdenum disulfide grease on the
collars and oil seal lips.
5 - 54
CHAS