KICK SHAFT AND SHIFT SHAFT
Shift shaft
1. Install:
NOTE:
Apply the engine oil on the roller and shift
shaft.
2. Install:
NOTE:
When installing the shift pedal onto the shift
shaft, be sure that the center of the shift pedal
is about 1 mm (0.04 in) a above the top of the
footrest.
Kick shaft assembly
1. Install:
NOTE:
Apply the molybdenum disulfide oil on the
●
inner circumferences of the kick gear and
ratchet wheel.
Align the punch mark a on the ratchet wheel
●
with the punch mark b on the kick shaft.
2. Install:
NOTE:
Make sure the stopper a of the torsion spring
fits into the hole b on the kick shaft.
4 - 76
ENG
Roller 1
●
Collar 2
●
Torsion spring 3
●
Shift shaft 4
●
Shift pedal 1
●
Bolt (shift pedal) 2
●
12 Nm (1.2 m · kg, 8.7 ft · lb)
Kick gear 1
●
Washer 2
●
Circlip 3
●
Ratchet wheel 4
●
Spring 5
●
Washer 6
●
Circlip 7
●
To kick shaft 8.
Torsion spring 1
●
To kick shaft 2.