Yamaha YZ250F(R) Owner's Service Manual page 224

Å
Å
ı
FRONT BRAKE AND REAR BRAKE
ı
3. Install:
Spring 1
●
To brake master cylinder piston 2.
NOTE:
Install the spring at the smaller dia. side.
Å Front
ı Rear
4. Install:
[Front]
Brake master cylinder kit 1
●
Washer 2
●
Circlip 3
●
Brake master cylinder boot 4
●
To brake master cylinder 5.
[Rear]
Brake master cylinder kit 1
●
Push rod 2
●
Circlip 3
●
Brake master cylinder boot 4
●
To brake master cylinder 5.
NOTE:
Apply the brake fluid on the brake master
●
cylinder kit.
Apply the lithium soap base grease on the tip
●
of the push rod.
When installing the circlip, use a long nose
●
circlip pliers.
Å Front
ı Rear
Front brake master cylinder
1. Install:
Brake master cylinder 1
●
Brake master cylinder bracket 2
●
Bolt (brake master cylinder bracket) 3
●
NOTE:
Install the bracket so that the arrow mark a
●
face upward.
First tighten the bolts on the upper side of the
●
brake master cylinder bracket, and then
tighten the bolts on the lower side.
5 - 20
CHAS
9 Nm (0.9 m · kg, 6.5 ft · lb)