Yamaha YZ250F(R) Owner's Service Manual page 246

HANDLEBAR
4. Install:
Collar 1
●
Grip cap cover 2
●
Throttle grip 3
●
NOTE:
Apply the lithium soap base grease on the
throttle grip sliding surface.
5. Install:
Throttle cables 1
●
To tube guide 2.
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.
6. Install:
Throttle cable cap 1
●
Screw (throttle cable cap) 2
●
WARNING
After tightening the screws, check that the
throttle grip 3 moves smoothly. If it does
not, retighten the bolts for adjustment.
7. Install:
Grip cap cover 1
●
Cover (throttle cable cap) 2
●
5 - 42
CHAS
4 Nm (0.4 m · kg, 2.9 ft · lb)