Yamaha YZ250F(R) Owner's Service Manual page 268

REAR SHOCK ABSORBER
2. Install:
Bushing 1
●
Collar 2
●
Dust seal 3
●
NOTE:
Apply the molybdenum disulfide grease on
●
the bearing.
Apply the lithium soap base grease on the
●
bushing, collars and dust seals.
Install the dust seals with their lips facing
●
outward.
3. Install:
Rear shock absorber
●
4. Install:
Bolt (rear shock absorber-frame) 1
●
Nut (rear shock absorber-frame) 2
●
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5. Install:
Bolt (rear shock absorber-relay arm) 1
●
Nut (rear shock absorber-relay arm) 2
●
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
6. Install:
Rear frame 1
●
Bolt [rear frame (upper)] 2
●
Bolt [rear frame (lower)] 3
●
7. Tighten:
Screw (air filter joint) 1
●
5 - 64
CHAS
56 Nm (5.6 m · kg, 40 ft · lb)
53 Nm (5.3 m · kg, 38 ft · lb)
32 Nm (3.2 m · kg, 23 ft · lb)
29 Nm (2.9 m · kg, 21 ft · lb)
3 Nm (0.3 m · kg, 2.2 ft · lb)