CRANKCASE AND CRANKSHAFT
NOTE:
Clean the contacting surface of left and right
crankcase before applying the sealant.
NOTE:
●
●
4 - 94
2. Check:
Shifter operation
●
Transmission operation
●
Unsmooth operation → Repair.
3. Install:
Oil strainer 1
●
Bolt (oil strainer) 2
●
10 Nm (1.0 m · kg, 7.2 ft · lb)
4. Apply:
Sealant
●
On the right crankcase 1.
®
Quick gasket
:
ACC-QUICK-GS-KT
YAMAHA Bond No. 1215:
90890-85505
5. Install:
Dowel pin 1
●
O-ring 2
●
Right crankcase
●
To left crankcase.
Fit the right crankcase onto the left crank-
case. Tap lightly on the case with soft ham-
mer.
When installing the crankcase, the connect-
ing rod should be positioned at TDC (top
dead center).
ENG