About This Manual; Objectives - Juniper G10 CMTS Hardware Manual

About This Manual

This chapter provides a high-level overview of the G10 CMTS Hardware Guide:

Objectives

This manual explains the hardware installation and basic troubleshooting for the G10 CMTS
and your HFC plant. It contains procedures for preparing your site for CMTS installation,
installing the hardware, starting up the CMTS, performing initial software configuration, and
replacing field-replaceable units (FRUs). After completing the installation and basic
configuration procedures covered in this manual, refer to the JUNOSg software configuration
guides for information about further configuring the JUNOSg software.
To obtain additional information about Juniper Networks CMTSs—either corrections to
information in this manual or information that might have been omitted from this
manual—refer to the G10 CMTS hardware release notes.
To obtain the most current version of this manual, the most current version of the hardware
release notes, and other Juniper Networks technical documentation, refer to the product
documentation page on the Juniper Networks Web site, which is located at
http://www.juniper.net.
To order printed copies of this manual or to order a documentation CD-ROM, which contains
this manual, please contact your sales representative.
! Objectives on page xiii
! Audience on page xiv
! Document Organization on page xiv
! Related Documents on page xiv
! Documentation Conventions on page xv
! Contact Juniper Networks on page xvi
! Documentation Feedback on page xvi
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
About This Manual xiii