Mazda CX-7 2007 Workshop Manual page 419

Front Oil Seal Removal Note
1. Remove the oil seal lip using a razor.
2. Remove the oil seal using a flathead screwdriver
with the tip protected by a rag to prevent
crankshaft oil seal damage.
Front Oil Seal Installation Note
1. Apply clean engine oil to a new oil seal.
2. Insert the oil seal into the engine front cover.
3. Tap in the oil seal using the SST.
Front oil seal press-in amount
0— 0.5 mm {0— 0.019 in}
Crankshaft Pulley Lock Bolt Installation Note
1. Install the SST to the camshaft as shown in the
figure.
2. Verify that cylinder No.1 is at TDC of the
compression stroke. (Position crank weight
contacts SST.)
MECHANICAL [L3 WITH TC]
RAG
49 H010 401
FRONT COVER BODY
HAMMER
0—0.5 mm
{0—0.019 in}
49 H010 401
FRONT OIL SEAL
(49 UN30 310610)
FRONT OIL SEAL
01-10
acxuuw00000199
acxuuw00000200
acxuuw00000201
303-1061
acxuuw00000202
01-10–25