Auto-Dimming Mirror/Compass With Homelink (If Equipped) - Subaru impreza 2017 Owner's Manual

3-80
Instruments and controls/Mirrors
To Operate the Auto-Dimming Fea-
ture
Press the switch to turn the auto-
dimming feature on/off. The auto-dimming
feature is enabled when the switch s
green LED indicator is on. The auto-
dimming feature will default to on with
each ignition cycle.
To Operate the Compass Feature
1. To turn the compass feature on/off,
press and hold the switch for more
than 3 seconds or until the display turns
on/off. The compass feature will default to
on with each ignition cycle.
2. If the display reads C , slowly drive
the vehicle in circles until compass is
calibrated.
Compass calibration zones
3. To adjust for compass zone variance:
(1) Find your current location and
zone number on the map.
(2) Press and hold the
more than 6 seconds or until a zone
number appears in the display.
(3) Once the zone number appears in
the display, toggle the
again until your current location zone
number appears. After you stop press-
ing the switch, your new zone number
will be saved. Within a few seconds,
the display will show a compass
direction.
4. If the vehicle s magnetics have chan-
ged or if the compass appears inaccurate,
recalibrate the compass. Press and hold
the switch for more than 9 seconds or
until a C appears in the display. Once a
C appears in the display, slowly drive the
vehicle in circles until compass is cali-
brated.
Auto-dimming mirror/com-
pass with HomeLink
equipped)
switch for
switch
1) Display
2) HomeLink Buttons
3) Switch
Your new automobile is equipped with an
automatic dimming mirror manufactured
by Gentex Corporation. During nighttime
driving, the auto-dimming feature senses
distracting glare from vehicle headlights
behind you and automatically dims to
eliminate the glare and preserve your
vision.
(if
®