Toshiba GA-1200 Scanning Manual page 46

4 SCAN TO TWAIN
Changeable items and their default values in the Scan to TWAIN function are shown
below.
Items
RESOLUTION
*1
DUPLEX
ROTATION
*1 This item is available only when the Reversing Automatic Document Feeder (optional) is
The image mode and density can be changed. See the Operator's Manual for
Coping Functions for details.
If the [CANCEL] button is pressed, the screen returns to the SCAN TO TWAIN menu.
5
Press the [START] button.
When originals are placed on the Automatic Document Feeder (optional) or the
Reversing Automatic Document Feeder (optional), the originals are scanned first and
the scanned images are then saved.
When an original is placed on the original glass, go to step 6.
When the equipment cannot detect
the original size, the original size
selecting screen appears. Select the
original size using the
ton and then press the [ENTER] but-
ton.
A/B series of the paper sizes are dis-
played depending on the original
size.
Scanning starts.
6
Place the next original on the
original glass if any. Select "1.
YES" using the
ton and then press the
[ENTER] button.
Repeat step 6 until all the originals are scanned.
44 Operating with Control Panel of This Equipment
Default Settings selectable
Selected
Selected
Selected
installed.
or
or
150dpi P.78 "Changing resolution
level"
200dpi
300dpi
400dpi
600dpi
OFF P.79 "Scanning 2-sided origi-
nals"
BOOK
TABLET
OFF P.79 "Rotating images"
ON
Select original size
1.LT
2.LD
but-
3.LT-R
Select original size
1.A4
2.A3
3.B5
SCAN NEXT ORIGINAL?
1.YES
but-
2.NO
Ref.