Toshiba GA-1200 Scanning Manual page 36

3 SCAN TO FILE
The settings available for Scan to File and the default settings are as follows:
Items
RESOLUTION
*1
DUPLEX
ROTATION
FILE FORMAT
DESTINATION
*1 Available only when the Reversing Automatic Document Feeder (optional) is installed.
*2 If only one location is set by the administrator, it will be the default setting.
The image mode and density can be changed. See the Operator's Manual for
Copying Functions for details.
If the [CANCEL] button is pressed, the screen returns to the SCAN TO FILE menu.
5
Press the [START] button.
Originals are scanned and stored if they are placed on the Automatic Document
Feeder (optional) or the Reversing Automatic Document Feeder (optional).
If originals are placed on the original glass, perform the procedure from Step 6.
When the equipment cannot detect
the original size, the original size
selecting screen appears. Select the
original size using the
ton and then press the [ENTER] but-
ton.
A/B series of the paper sizes are dis-
played depending on the original
size.
Scanning of the originals will start.
34 Procedure for Scan to File
Default Settings selectable
Selected
Selected
Selected
Selected
Multi-page TIFF
Single-page TIFF
REMOTE 1
*2
REMOTE 2
or
150dpi P.78 "Changing resolution
level"
200dpi
300dpi
400dpi
600dpi
OFF P.79 "Scanning 2-sided origi-
nals"
BOOK
TABLET
OFF P.79 "Rotating images"
ON
PDF P.80 "Changing file format"
P.80 "Changing destination to
store files"
Select original size
1.LT
but-
2.LD
3.LT-R
Select original size
1.A4
2.A3
3.B5
Ref.