8
FRU Disassembly/Assembly
Gear train
8-28
Phaser 560 Color Printer
1.
Turn off the printer.
2.
Remove the imaging unit and the developer cartridges. Safely store
the imaging unit.
3.
Remove the lower front and rear printer covers, and the right side
front, rear and lower covers.
Note
In the next step, take care not to damage the output tray full sensor
flag.
4.
Carefully tilt the printer onto its right side.
5.
Remove the nine large-head screws securing the bottom pan in place.
6.
Remove the frame cross member by removing the three screws
securing it in place.
7.
Remove the two screws securing the gear train restraint in place.