No Printing On Edge Of Print; Image Is Not Centered On The Print When It Should Be; The Print Is Wrinkled - Tektronix Phaser 560 Service Manual
Color printer
Hide thumbs
Also See for Phaser 560:
- User manual (259 pages) ,
- Service manual (228 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
No printing on edge of print
1.
If one primary color is missing, replace that color's toner cartridge.
2.
Check that each toner cartridge moves forward smoothly toward the
imaging unit. Also inspect the two metal pads on the ends of the toner
cartridge that the toner cartridge selector cams push against.
3.
Inspect the cartridge selector/eject unit to ensure that the cams are in
good condition. Replace the cartridge selector/eject unit.
4.
Replace the imaging unit.
Image is not centered on the print when it should be
1.
Is the paper in good condition and appropriate for a laser printer.
2.
Is the printer printing within its environmental specifications? Refer
to the Chapter 1 topic "Specifications" on page 1-14.
3.
Ensure the paper feeder is properly installed.
4.
Is the top and left margin adjustments correct? Refer to the service
tests discussed in the topic "Printer self-diagnostics" on page 9-6.
5.
Clean the intermediate and aligning rollers.
6.
Replace the paper feeder.
7.
Replace the engine control board.
8.
Replace the laser scanner.
The print is wrinkled
1.
Check for an obstruction in the paper path, particularly the paper
feeder and the fuser.
2.
Is the paper in good condition and appropriate size, weight, grain and
grade for a laser printer? Refer to the Chapter 1 topic "Specifications"
on page 1-14.
3.
Is the printer printing within its environmental specifications? Refer
to the Chapter 1 topic "Specifications" on page 1-14.
4.
If possible, you should feed long-grain paper into the printer.
Long-grained paper's grain is parallel to the paper path (the direction
the paper travels while it is fed through the printer).
5.
If the print is exiting the printer with "dog-ears" (the corners folded
down, check the paper separators metal tabs in the corners of paper
tray. Bend the tabs slightly to correct the problem or replace the tray.
Troubleshooting
Service Manual
6-27
6
Advertisement
Table of Contents
Troubleshooting
