Checking The Frame; Checking The Swingarm; Checking The Throttle Cable Routing - Husqvarna TE 125 EU Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.40

Checking the frame

12.41

Checking the swingarm

12.42

Checking the throttle cable routing

x
–
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a mechanical impact:
–
Change the frame.
401799-01
x
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401520-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
(TE 125)
–
Check the throttle cable routing.
The throttle cable must be routed to the carburetor on the left side of the
upper frame tube behind the handlebars.
» If the throttle cable is not routed as specified:
–
L01700-10
x
Info
A frame that has been damaged due to a mechanical impact must
always be changed. Repair of the frame is not authorized by Husq-
varna.
x
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by Husqvarna.
p. 51)
( p. 55)
x
Correct the throttle cable routing.
61