6
CONTROLS
6.1
Clutch lever
6.2
Hand brake lever
6.3
Throttle grip
6.4
Kill switch (TE EU/AUS)
6.5
Kill switch (TE USA)
The clutch lever
The clutch is hydraulically operated and self-adjusting.
C00530-10
The hand brake lever
The hand brake lever is used to activate the front brake.
L01615-10
The throttle grip
L01615-11
The kill switch
Possible states
•
Kill switch
engine can be started.
•
Kill switch
engine stops, and a non-running engine will not start.
C00546-10
The kill switch
Possible states
•
Kill switch
engine can be started.
•
Kill switch
engine stops, and a non-running engine will not start.
C00547-10
is fitted on the left side of the handlebar.
1
is located on the right side of the handlebar.
1
is fitted on the right side of the handlebar.
1
is fitted on the left side of the handlebar.
1
in basic position – In this position, the ignition circuit is closed, and the
pressed – In this position, the ignition circuit is interrupted, a running
is fitted on the left side of the handlebar.
1
in basic position – In this position, the ignition circuit is closed and the
is pressed – In this position, the ignition circuit is interrupted, a running
14