Installing The Front Fender; Removing The Shock Absorber - Husqvarna TE 125 EU Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.17

Installing the front fender

12.18

Removing the shock absorber

–
Remove screws
C00572-12
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
C00572-11
–
Position the brake line and wiring harness in the brake line guide.
–
Mount and tighten screws
Guideline
Remaining screws, chassis
–
Connect plug-in connectors
C00596-11
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
x
Preparatory work
–
Raise the motorcycle with the lift stand. (
–
Remove the right side cover. (
–
Remove the main silencer. (
Main work
–
Remove screw
–
Remove fitting
L01669-10
–
Press angle lever
–
Press linkage lever
L01668-10
. Take off the fender.
3
.
2
of the turn signals.
3
p. 84)
p. 55)
p. 54)
.
1
.
2
toward the rear.
3
downward.
4
.
1
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 83)
p. 43)
50