Identifying Degraded Memory In A System; Identifying Different Memory Sizes In A System Board; Using The Showdevices Command - Fujitsu SPARC Enterprise M4000 Product Notes

Identifying Degraded Memory in a
System
1. Log in to XSCF.
2. Type the following command:
XSCF> showstatus
The following example identifies that DIMM number 0A on Memory Board #5 has
degraded memory.
XSCF> showstatus
MBU_B Status:Normal;
MEMB#5 Status:Normal;
* MEM#0A Status:Degraded;
Identifying Different Memory Sizes in a
System Board
To identify if the domain contains system boards with different memory sizes, you
can use either of the following commands to display the list of memory sizes:
showdevices(8) command on the XSCF
■
prtdiag(1M) command on the domain
■

Using the showdevices Command

1. Log in to XSCF.
Information About Software 57