Solaris Os Issues Fixed In Solaris 10 5/08 - Fujitsu SPARC Enterprise M4000 Product Notes

Solaris OS Issues Fixed in Solaris 10 5/08

TABLE 11
them in supported releases earlier than Solaris 10 5/08.
Solaris OS Issues Fixed in Solaris 10 5/08
TABLE 11
CR ID Description
6472153 If you create a Solaris Flash archive on a non-
SPARC Enterprise M4000/M5000 sun4u server
and install it on a SPARC Enterprise
M4000/M5000 sun4u server, the console's TTY
flags will not be set correctly. This can cause
the console to lose characters during stress.
6522433 After the CPU hardware error occurred, the
fmdump(1M) command on the domain may
display an incorrect faulty component.
6527811 The showhardconf(8) command on the XSCF
cannot display PCI card information that is
installed in External I/O Expansion Unit, if the
External I/O Expansion Unit is configured
using PCI hotplug.
44 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1091 • April 2010
lists issues that have been fixed in Solaris 10 5/08 OS. You might encounter
Workaround
For Solaris 10 8/07 or earlier, this has been
fixed in patch 137046-01.
[Workaround]
Just after installing Solaris OS from a Solaris
Flash archive, telnet into the SPARC Enterprise
M4000/M5000 server to reset the console's
TTY flags a follows:
# sttydefs -r console
# sttydefs -a console -i "9600 hupcl
opost onlcr crtscts" -f "9600"
This procedure is required only once.
For Solaris 10 8/07 or earlier, this has been
fixed in patch 127127-11.
[Workaround]
Check system status on XSCF.
For Solaris 10 8/07 or earlier, this has been
fixed in patch 128346-01.